Pioneer BDP-320 - Manual (Page 18)

03
18
En
Chapter 3
Getting Started
Making settings using
the Setup Navigator
menu
Be su re to perform these settings when using the player
fo r the first time.
Caution
• Befo re turning on the power, check that the
connections between the player and other devices are
co rrect. Also, turn on the power of the devices
connected to the player before turning on the player’s
power.
• When using a Pionee r Flat Screen TV or front
projector compatible with the KURO LINK function,
set KURO LINK to On on the connected device befo
re
tu rning on the player’s power.
• The sc reen in step 10 and test tones are output
simultaneously acco rding to the settings in steps 4 to
7. Lowe r the volume of the devices connected with the
player.
Note
• When a Pionee r Flat Screen TV or front projector
com patible with the KURO LINK function is
connected to the player using an HDMI cable, the
player is automatically set to the optimum picture
quality fo
r the connected device.
1 Turn on the TV’s power and switch the input.
See the TV’s o perating instructions for instructions on
o perating the TV.
2 Turn on the player’s power.
P ress  STANDBY/ON.
Check that the Setup Navigator menu is displayed.
 If the Setup Navigator menu is not
displayed
 Press
HOME MENU to display the Home
Menu, select Initial Setup
 Setup Navigator 
Start, then press ENTER.
3 Select the OSD language.
Use
/ to select, then press ENTER.
Example (U.K. models):
When a Pionee r Flat Screen TV that is compatible with
KURO LINK is connected to this player’s HDMI OUT
te rminal, language settings are imported from the
Pionee r Flat Screen TV’s language settings before Setup
Navigator begins.
4 Select and set the video and audio output
terminals.
Select the actually connected video and audio out
put
te rminals.
Use
/// to select, then press ENTER.
Caution
• When HDMI is selected for Video, no video signals
a re output from the COMPONENT VIDEO or VIDEO
out put terminals.
• When COMPONENT VIDEO or VIDEO is selected at
Video, no video signals are output from the HDMI
OUT terminal.
• The video and audio signals out put from the set
out put terminals are output synchronously (lip
synch ronization).
• When COMPONENT VIDEO or VIDEO is selected at
Video, no sound is output if HDMI is selected at
Audio.
Follow the
procedure below to redo the connections,
then select the proper connection at the setup
sc reen.
– When connecting using com ponent video cables
o r a video cable to watch the picture, connect to an
AV receiver or amplifier, or a TV using either analog
audio cables, an o ptical digital audio cable
( page 16).
TOP MENU TOOLS
HOME
MENU RETURN
ENTER
Setting item Output terminal name
Vid
e
o
HDMI HDMI OUT
COMPONENT VIDEO VIDEO OUT COMPONENT VIDEO
VIDEO VIDEO
Aud
io
HDMI HDMI OUT
DIGITAL AUDIO DIGITAL OUT
ANALOG AUDIO AUDIO OUT
Setup Navigator
BD PLAYER
Please select the on-screen display language.
Audio, subtitle and BDMV/DVD-Video menu
language will also be set.
320_VXJ5_IBD_EN.book 18 ページ ２００９年２月２５日 水曜日 午前１０時５７分