Pioneer BDP-320 - Manual (Page 22)

03
22
En
• The out put video resolution depends on the video
out put terminal (page 23).
• The out put video resolution setting can also be
switched by selecting Output Video Resolution
f rom the TOOLS menu.
 About the frame/field frequency
and NTSC/PAL TV systems
U.K., Australia and New Zealand models: By factory default
setting, the f
rame/field frequency is set for an output of 50
Hz, and the video signal out put from the VIDEO output
te rminals is set to be output in the PAL TV system format.
When sou rces with a frame/field frequency of 60 or 24 Hz
a re played, the output frame/field frequency
automatically switches to 60 Hz (o r 24 Hz for HDMI,
de pending on the setting), and the TV system format for
the video signal out put from the VIDEO output terminals
de pends on the NTSC on PAL TV setting.
Others: By factory default setting, the frame/field
f
requency is set for an output of 60 Hz, and the TV system
fo rmat for the video signal output from the VIDEO output
te rminals depends on the NTSC on PAL TV setting. When
sou rces with a frame/field frequency of 50 Hz are played,
the out put frame/field frequency automatically switches
to 50 Hz, and the video signal out put from the VIDEO
out put terminals is set to be output in the PAL TV system
fo rmat.
When playback is stopped, the frame/field frequency and
TV system settings remain at the settings last used. The
f rame/field frequency and TV system settings do not
change even when the power is turned off. They only
switch when a video mate rial with a different frame/field
f requency is played.
If the picture is not displayed on the TV when a source
with a diffe rent frame/field frequency is played, use the
procedure below to switch the frame/field frequency and
TV system settings fo
r the signal output from the player.
Eject the disc, then press the  OPEN/CLOSE button on
the f ront panel while pressing the  button to switch to a
diffe rent frame/field frequency. The frame/field frequency
switches between 50 Hz and 60 Hz each time this
o
peration is performed. The indicator for the frame
f requency’s current setting lights on the front panel
dis play (page 12).
 About Film material
The film mate rial is a video signal with a frame rate of 24
f rames/second. For example, these materials include
1080/24 p, 720/24p, etc.
 To output film material
To out put 1080/24p film material from HDMI OUT
te rminal, set the output video resolution to either Auto or
Source Direct.
Caution
• 1080/24 p signals can only be output from the HDMI
OUT terminal. They cannot be output from other
video te
rminals.
• When Auto is selected, the picture is output at 60
f rames/second if your TV is not compatible with 1080/
24 p signals.
• When Source Direct is selected, the signals are
out put as such, even if your TV is not compatible with
1080/24 p signals. If the picture is not displayed
properly, use OUTPUT RESOLUTION to set an output
video resolution at which the video and audio signals
a re properly output.
• Even if Auto or Source Direct is selected, 720/24p
video signals a re output at 60 frames/second.
Auto


Output Video Resolution Source : 1080/50i
Current Output : 1080/50i
Video resolution of the
cu rrently playing disc
Out put video resolution
f rom the player
Example:
320_VXJ5_IBD_EN.book 22 ページ ２００９年２月２５日 水曜日 午前１０時５７分