Pioneer BDP-320 - Manual (Page 59)

59
En
07
KURO LINK
Network
Problem Check Remedy
KURO LINK function does
not wo
rk.
Is the HDMI cable properly
connected?
To use the KURO LINK function, connect the Flat Sc reen TV, and AV
system (AV receiver or amplifier, etc.) and HD AV Converter to the
HDMI OUT terminal (page 15).
Is the HDMI cable you a re
using a High S peed HDMI™
cable?
Use a High S peed HDMI™ cable. The KURO LINK function may not
wo rk properly if HDMI cable other than a High Speed HDMI™ cable is
used.
A re you connected to the TV
using an HDMI cable to
watch the
picture?
If video signals a re being output from a terminal other than the HDMI
OUT terminal, the KURO LINK function does not work. Connect to the
TV using an HDMI cable and
press VIDEO SELECT to switch to the
HDMI OUT terminal (pages 15 and 21).
Is KURO LINK set to On on
the player?
Set KURO LINK to On on the player (page 38).
Does the connected device
su
pport the KURO LINK
function?
• The KURO LINK function will not wo rk with devices of other brands
that do not su pport the KURO LINK function, even when connected
using an HDMI cable.
• The KURO LINK function will not wo rk if devices that do not support
the KURO LINK function a re connected between the KURO LINK-
com patible device and the player.
• See About connections to components of other makes supporting the
KURO LINK function on page 15.
• Even when connected to a Pionee r product compatible with the
KURO LINK function, some of the functions may not wo rk.
Also refer to the operating instructions of the connected device.
Is KURO LINK set to On on
the connected device? Set KURO LINK to On on the connected device. The KURO LINK
function o
perates when KURO LINK is set to On for all devices
connected to the HDMI OUT terminal.
Once connections and settings of all the devices a re finished, be sure
to check that the player’s picture is output to the Flat Screen TV. (Also
check afte r changing the connected devices and connecting and/or
disconnecting HDMI cables.) If the player’s picture is not being output
to the Flat Sc reen TV, the KURO LINK function may not work properly.
Fo r details, refer to the operating instructions of the connected device.
A re multiple players
connected?
The KURO LINK function may not wo rk if three or more players,
including this player, are connected by HDMI cable.
The in put does not switch
automatically on the Flat
Sc
reen TV and AV system (AV
receiver or amplifier, etc.)
when
playback is started on
the player or the Home Menu
o r Home Media Gallery is
dis played.
Is Display Power On set to
Off on the player?
Set Display Power On to On (page 38).
Problem Check Remedy
• BD-LIVE function
(connection to the Inte
rnet)
cannot be used.
• “Connection to the softwa re
u pdating server failed” is
dis played when you try to
u pdate the software.
Pe rform Connection Test (page 42). If “Network connection test
com pleted successfully.” is displayed, check the proxy server settings
( page 41). Also there may be a problem with the Internet connection.
Contact you r Internet service provider.
“OK to g rant network access
to BD a pplications?” is
dis played when a BD-LIVE
com patible disc is read.
This is dis played if the BD-ROM does not have valid BD-LIVE network
access a pproval. Select No if you do not want to authorize access to the
netwo rk.
320_VXJ5_IBD_EN.book 59 ページ ２００９年２月２５日 水曜日 午前１０時５７分