Pioneer DDJ-SR - Manual (Page 17)

En 17
Basic
Operation
Monitoring sound with headphones
Set the positions of the controls, etc., as shown below.
Names of controls, etc. Position
HEADPHONES MIX control Center
HEADPHONES LEVEL control Turned fully counterclockwise
1 Press the headphones [CUE] button for the channel 1.
2 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate
level.
Note
This unit and the Serato DJ software include a variety of functions
enabling individualistic DJ performances. For details on the respective
functions, see the operating instructions and the Serato DJ software
manual.
! This unit’s operating instructions can be downloaded from the
Pioneer DJ support site. For details, see Downloading the latest ver-
sion of these operating instructions (p. 32).
! The Serato DJ software manual can be downloaded from Serato.com.
For details, see Downloading the Serato DJ software manual (p. 32).
Quitting the system
1 Quit Serato DJ.
When the software is closed, a message for confirming that you want to
close it appears on the computer’s screen. Click [Yes] to close.
2 Switch the [ON/OFF] switch on this unit’s rear panel
to the [OFF] side to turn this unit’s power off.
3 Disconnect the USB cable from your computer.