Pioneer DEH-P7700MP - Manual (Page 34)

Introduction of advanced
multi-CD player operation
1
1 Function display
Shows the function status.
% Press FUNCTION to displaythe function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
Repeat (repeat play)Disc title listRandom
(random play)Scan (scan play)ITS Play
(ITS play)Pause (pause)Comp. (compres-
sion and DBE)
# To return to the playback display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeatingplay
There are three repeat play ranges for the
multi-CD player: MCD (multi-CD player re-
peat), TRACK (one-track repeat) and DISC
(disc repeat).
1 Press FUNCTION to select Repeat.
Press FUNCTION until Repeat appears in the
display.
2 Press c or d to select the repeat range.
Press c or d until the desired repeat range ap-
pears in the display.
! MCD  Repeat all discs in the multi-CD
player
! TRACK  Repeat just the current track
! DISC  Repeat the current disc
Notes
! If you select other discs during repeat play,
the repeat play range changes to MCD.
! If you perform track search or fast forward/re-
verse during TRACK, the repeat play range
changes to DISC.
Playingtracks in a random
order
Random play lets you play back tracks in a
random order within the repeat range, MCD
and DISC.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Press FUNCTION to select Random.
Press FUNCTION until Random appears in
the display.
3 Press a to turn random playon.
Random :ON appears in the display. Tracks
will play in a random order within the pre-
viously selected MCD or DISC ranges.
4 Press b to turn random playoff.
Random :OFF appears in the display. Tracks
will continue to play in order.
Multi-CD Player
En
34
Section
08