Pioneer BDP-LX71 - Manual (Page 17)

17
En
02
video deck. Furthermore, the picture may not be displayed
properly due to the copy protection when the player is connected
to a TV with a built-in video deck. For details, contact the
manufacturer of your TV.
Connecting an AV receiver
or amplifier
Connect to an AV receiver or amplifier in order to enjoy the surround
sound of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD
Master Audio, DTS-HD High Resolution Audio or DTS Digital
Surround. For instructions on connecting the TV and speakers to the
AV receiver or amplifier, refer to the operating instructions of AV
receiver or amplifier.
Note
• Make the settings in the Setup Navigator menu according to the
type of cable connected (page 20).
• To output video signals from this player, connect using one of
the following (not including when connected using an HDMI
cable): a component video cable (commercially available), an S-
Video cable (commercially available) or a video cable (included).
Connecting using a commercially
available HDMI cable
Caution
• When DTS-HD Master Audio and DTS-HD High Resolution
Audio signals are output as linear PCM signals, the DTS Digital
Surround signals are converted to linear PCM for output
(page 50).
R
R
AUDIO OUT (2 ch) AUDIO OUT (7.1 ch) VIDEO OUT
HDMI OUT
DIGITAL OUT
CONTROL IN
L
L
Y
P B
P R
FRONT
COAXIAL
OPTICAL
COMPONENT VIDEO AC IN
SURROUND CENTER
VIDEO
S-VIDEO
SUB WOOFER
SURROUND BACK
P B
P R
VIDEO
S-VIDEO
HDMI OUT
Player’s rear panel
To HDMI input terminal
From HDMI output terminal
AV receiver or amplifier
HD
MI
c
a
b
le
(c
omme
rci
ally
av
ailable)
To HDMI input terminal
TV
HD
MI
cab
le
(com
mer
c
iall
y
avai
lable)
Match the direction of
the plug to the terminal
and insert straight.
Direction of
signal flow