09 useful adjustment settings, Useful adjustment settings 09, Useful adjustment settings – Pioneer PDP-436RXE User Manual

Page 33: Switching the vertical drive frequency, Adjusting image positions, Selecting an input signal type, Colour system setting

Advertising
background image

33

En

Useful Adjustment Settings

09

English

Useful Adjustment Settings

Switching the vertical drive frequency

You can switch the vertical drive frequency for screen display
between 75 Hz and 100 Hz. Choose the drive frequency that
better suits your broadcasting signals.

1

Press

HOME MENU.

2

Select “Option” ( / then

ENTER).

3

Select “Drive Mode” ( / then

ENTER).

4

Select 75 Hz or 100 Hz ( / then

ENTER).

5

Press

HOME MENU to exit the menu.

NOTE

• This setting can be made for each input source separately.

• This setting cannot be made when 480i, 480p, 1080i@60Hz,

720p@60Hz, or 1080p@24Hz signals are input.

• If you select “Auto” for “Side Mask” (page 35), the selection

for “Drive Mode” becomes ineffective.

Adjusting image positions

Adjust the horizontal and vertical positions of images on the
Plasma Display.

1

Press

HOME MENU.

2

Select “Option” ( / then

ENTER).

3

Select “Position” ( / then

ENTER).

4

Select “H/V Position Adjust” ( / then

ENTER).

5

Adjust the vertical position ( / ) or the horizontal
position ( / ).

6

Press

HOME MENU to exit the menu.

NOTE

• To restore the factory defaults for all items, press / to

select “Reset” in step 4, and then press

ENTER. A

confirmation screen appears. Press / to select “Yes”, and
then press

ENTER.

• Adjustments are stored separately according to input

source.

Selecting an input signal type

After connecting to the INPUT 1, INPUT 2, or INPUT 3 terminal,
specify the type of video signals to be received from the
connected equipment. For the type of the signals, see the
operation manual that came with the connected equipment.

Before starting the menu, press

INPUT 1, INPUT 2, or INPUT

3 on the remote control unit or press INPUT on the Plasma
Display to select an input source.

1

Press

HOME MENU.

2

Select “Option” ( / then

ENTER).

3

Select “Input Select” ( / then

ENTER).

4

Select a signal type ( / then

ENTER).

• For INPUT1, you can select Video or RGB.

• For INPUT2, you can select Video or S-Video or

COMPONENT.

• For INPUT3, you can select Video, S-Video, or RGB.

5

Press

HOME MENU to exit the menu.

NOTE

• If no image appears or images appear in inappropriate

colours, specify another video signal type.

• For the signal types to be specified, check the operation

manual that came with the connected equipment.

Colour system setting

If an image does not appear clearly, select another colour
system (e.g., PAL, NTSC).

1

Press

HOME MENU.

2

Select “Option” ( / then

ENTER).

3

Select “Colour System” ( / then

ENTER).

4

Select a video signal system ( / then

ENTER).

• You can select “Auto”, “PAL”, “SECAM”, “NTSC”, or

“4.43NTSC”.

• With “Auto” selected, input signals are automatically

identified.

5

Press

HOME MENU to exit the menu.

NOTE

• The factory default is “Auto”.

• You need to perform colour system setting for each of INPUT

1 to 4.

• For the colour system setting, see steps 11 and 12 under

“Using Manual Adjust” (page 25).

Drive Mode

75Hz

100Hz

Position

H/V Position Adjust

Reset

Input Select

Video

S-Video

RGB

COMPONENT

Colour System

Auto

PAL

SECAM

NTSC

4.43NTSC

PDP-436RXE.book Page 33 Thursday, September 29, 2005 10:37 AM

Advertising