Entering a password, Useful adjustment settings 09, Sleep timer – Pioneer PDP-436RXE User Manual

Page 35: Using a password

Advertising
background image

35

En

Useful Adjustment Settings

09

English

Changing the brightness at both sides
of the screen (Side Mask)

With the 4:3, FULL 14:9, or CINEMA 14:9 screen size, you can
change the brightness of the grey side masks that appear at
both sides of the screen.

1

Press

HOME MENU.

2

Select “Option” ( / then

ENTER).

3

Select “Side Mask” ( / then

ENTER).

4

Select the desired parameter ( / then

ENTER).

5

Press

HOME MENU to exit the menu.

NOTE

• If you select “Auto”, the selection for “Drive Mode” (page 33)

becomes ineffective.

Sleep Timer

When the selected time elapses, the Sleep Timer automatically
places the system into the standby mode.

1

Press

HOME MENU.

2

Select “Sleep Timer” ( / then

ENTER).

3

Select the desired time ( / then

ENTER).

• You can select from among “Off” (cancel), “30 min”, “60

min”, “90 min”, and “120 min”.

4

Press

HOME MENU to exit the menu.

NOTE

• Five minutes before the selected time elapses, the remaining

time appears every minute.

• To check the remaining time, perform steps 1 and 2. After

checking the time, press

HOME MENU to restore the

previous display.

• The SLEEP indicator on the front of the Plasma Display lights

up in orange when the Sleep Timer is set.

Using a password

The Plasma Display System provides the Child Lock function
for preventing children from watching inappropriate
programmes. You need to enter a password when watching
programmes with “Block” specified. Before the system is
shipped, “1234” is preset as the factory-default password. You
can however, change the password as you want.

When using the Home menu you select “Auto Installation”,
“Analogue TV Setup”, or “Password”, a screen prompting
password entry appears to prevent others from changing the
programme settings at their choices.

Entering a password

In a case where you select a channel blocked with Child Lock
or password entry is requested when attempting to open the
menu, enter a password correctly.

1

Enter a correct 4-digit password using buttons

0 – 9.

NOTE

• If you fail password entry three times, “Invalid password.”

appears, and the menu is closed. In order to display the
password entry screen again to unlock the password, select
the blocked channel or open the menu again.

• If the password entry screen disappears before entry, you

may recall it by pressing

ENTER.

Item

Description

Fixed
(factory default)

Always sets the same brightness for the grey
side masks.

Auto

Adjusts the brightness of the grey side masks
according to the brightness of images.

Side Mask

Fixed

Auto

Please Input Your Password.

PDP-436RXE.book Page 35 Thursday, September 29, 2005 10:37 AM

Advertising