Din rear-mount, Installation – Pioneer AVH-P7500DVD User Manual

Page 16

Advertising
background image

15

Installation

DIN Rear-mount

Installation using the screw holes on
the side of the unit

• Fastening the unit to the factory

radio mounting bracket. (Fig.
15) (Fig. 16) (Fig. 17)

Select a position where the screw holes
of the bracket and the screw holes of
this product become aligned (are fit-
ted), and tighten the screws at 2 places
on each side. Use any of binding
screws (4

× 3 mm), binding screws (5

× 6 mm) or flush surface screws (5 × 6
mm), depending on the shape of the
screw holes in the bracket.

*1 Use binding screws (4

× 3 mm) only.

Fig. 15

• When installing in a shallow space,

use the following screw holes. In
this case, stick conceal tape on parts
that protrude from the dashboard.

Fig. 16

*2 If the screw holes of the bracket and the

screw holes of this unit are not aligned, use a
file to widen the screw holes of the bracket to
match up the screw holes on this unit.
Tighten the screws at 2 places on each side.

Fig. 17

Screw

Dashboard or
Console

Factory radio mounting
bracket

*2

*1

Conceal tape

*1

*1

Advertising