Loading a disc, Adjusting the volume, Turning the unit off – Pioneer AVH-P6600DVD User Manual

Page 20: Using the rear display, Basic operations

Advertising
background image

Loading a disc

% Insert a disc into the disc loading slot.

Playback will automatically start.

# If DVD AUTO PLAY is on, SOME DISCS MAY
NOT FULLY OPERATE ON THIS SYSTEM is dis-
played. (Refer to Automatic playback of DVDs on
page 93.)
# When a disc is loaded in this unit, touch the
source icon and then touch DVD to select DVD.
# If DVD DISC AUTO is turned off, touch the
source icon and then touch DVD to select DVD
(refer to the previous page).
# To eject a disc, press EJECT.

Notes

! The DVD player plays one, standard, 12-cm or

8-cm (single) disc at a time. Do not use an
adapter when playing 8-cm discs.

! Do not insert anything other than a disc into

the disc loading slot. Discs which can be
played back are listed on Playable discs on
page 8.

! If you cannot insert a disc completely or if

after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting it again.

! If the DVD player does not operate properly,

an error message such as ERROR-02 may be
displayed. Refer to Error messages on page
106.

! If bookmark function is on, DVD playback re-

sumes from the selected point. For more de-
tails, refer to Resume playback (Bookmark) on
page 41.

Adjusting the volume

% Use VOLUME to adjust the sound level.

With the head unit, rotate VOLUME to in-

crease or decrease the volume.

With the remote control, press VOLUME to in-

crease or decrease the volume.

Turning the unit off

% When using the touch panel keys,

touch the source icon and then touch OFF.

# When the source icon is not displayed, you
can display it by touching the screen.

% When using the button, press SOURCE

and hold until the unit turns off.

Using the rear display

You can watch a DVD/Video CD on the rear

display regardless of whether DVD (built-in

DVD player) is selected as the source or not.

! To watch a DVD/Video CD on the rear dis-

play only, switch the operation mode on the

remote control to DVD. And you can oper-

ate the DVD/Video CD playback on the rear

display independently by the remote con-

trol. (Refer to page 17.)

CAUTION

When you have turned the DVD/Video CD play-
back on by pressing REAR ON, you cannot turn it
off even if you press SOURCE and hold. In this
case, press REAR ON to turn the DVD/Video CD
playback off.

% Press REAR ON to watch a DVD/Video

CD on the rear display when DVD (built-in

DVD player) is not selected as the source.

DVD/Video CD playback is turned on and the

illumination color of REAR ON changes into

the different color than the other buttons.

# You can also turn the DVD/Video CD playback
on by pressing REAR.S on the remote control.
# To turn the DVD/Video CD playback off, press
REAR ON again.

Note

When a Pioneer navigation unit is connected to
this unit, the navigation image can be displayed
on the rear display. (Refer to page 100.)

Basic Operations

En

20

Section

04

Advertising