Pioneer AVH-P6600DVD - Manual (Page 97)

or subwoofer output (refer to Using subwoofer
output on page 75) in the audio menu on.
! If you change the subwoofer controller, sub-
woofer output and nonfading output in the
audio menu return to the factory settings.
! Both rear speaker leads output and RCA rear
output are switched simultaneously in this
setting.
Correcting distorted sound
You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to LOW. Normally, leave the set-
ting at HIGH to ensure quality sound.
! Only when the multi-channel processor
(e.g., DEQ-P6600) is connected to this unit,
you can operate this function.
1 Touch A.MENU and INITIAL and then
touch NEXT.
2 Touch DIGITAL ATT.
3 Touch or to switch the digital at-
tenuator setting.
Touch to select low setting and LOW ap-
pears in the display. Touch to select high
setting and HIGH appears in the display.
Switching the sound
muting/attenuation
Sound from this system is muted, attenuated
or mixed automatically in the following cases:
! When a call is made or received using a
cellular telephone connected to this unit.
! When the voice guidance is output from a
Pioneer navigation unit connected to this
unit.
1 Touch A.MENU and INITIAL and then
touch NEXT.
2 Touch TEL/GUIDE.
3 Touch or to select any of the mut-
ing, attenuation or mixing.
Touch or until the desired setting ap-
pears in the display.
! MUTE  Muting
! ATT 20dB  Attenuation (ATT 20dB has a
stronger effect than ATT 10dB)
! ATT 10dB  Attenuation
Notes
! The sound is turned off, MUTE or ATT is dis-
played and no audio adjustment is possible.
! Operation returns to normal when the phone
connection or the voice guidance is ended.
Switching the automatic
disc playback
You can turn automatic disc playback on or off
when you insert a disc into the disc loading
slot. When this function is on, the disc will be
automatically played after it is inserted into
the disc loading slot.
Initially, this function is set to on.
1 Touch A.MENU and INITIAL and then
touch NEXT.
2 Touch DVD DISC AUTO.
InitialSettings
En
97
Section
18
InitialSettings