Pioneer AVH-P4200DVD - Manual (Page 51)

1 Display the DSP function menu.
Refer to Introduction of menu operations on
page 46.
2 Touch Fader/Balance on the DSP func-
tion menu.
3 Touch a or b to adjust the front/rear
speaker balance.
Range:
Front:25 to Rear:25
# Select F/R: 0 L/R: 0 when only using two
speakers.
4 Touch c or d to adjust the left/right
speaker balance.
Range:
Left:25 to Right:25
Using sound field control
The SFC function creates the sensation of a
live performance.
! The acoustics of performance spaces differ
depending on the extent and contour of
space through which sound waves can
move and on how the created sounds
bounce off the stage, walls, floors and ceil-
ings. At a live performance you hear music
in three stages: direct sound, early reflec-
tions, and late reflections, or reverbera-
tions. These factors are programmed into
the SFC circuitry to recreate the acoustics
of various performance settings.
1 Display the DSP function menu.
Refer to Introduction of menu operations on
page 46.
2 Touch SFC on the DSP function menu to
select the setting.
Musical(Musical)
—Drama(Drama)—Action
(Action)
—Jazz(Jazz)—Hall(Hall)—Club(Club)
—Off(Off)
Note
If the source is a 2-channel LPCM or Dolby Digital
audio source, we recommend turning Dolby Pro
Logic II on when selecting SFC effects that are
most suitable for 5.1-channel audio sources
(such as Musical, Drama or Action).
On the other hand, when selecting SFC effects
that are suitable for 2-channel audio sources
(such as
Jazz, Hall or Club), we recommend turn-
ing Dolby Pro Logic II off.
Adjusting source levels
With SLA (source level adjustment), the vo-
lume levels of each source can be adjusted to
prevent significant differences between
sources.
! Settings are based on the FM volume level,
which remains unchanged.
1 Compare the FM volume level with the
level of the source you wish to adjust.
2 Display the DSP function menu.
Refer to Introduction of menu operations on
page 46.
3 Touch Source Level Adjuster on the DSP
function menu.
4 Touch a or b to adjust the source vo-
lume.
Notes
! The MW/LW volume level can also be adjusted
with this function.
! Video CD, CD, compressed audio and DivX
are automatically set to the same source level
adjustment volume.
! External unit 1 and external unit 2 are automa-
tically set to the same source level adjustment
volume.
! AUX (auxiliary input) and AV (AV input) are
automatically set to the same source level ad-
justment volume.
En
51
Section
13
Menu
operations
Menu operations