Listening to your system, Basic operation, Auto playback – Pioneer HTP-SB300 User Manual

Page 20: 04 listening to your system, Listening to your system 04, Chapter 4

Advertising
background image

Listening to your system

04

20

En

Chapter 4

Listening to your system

Important

• The listening modes and many features

described in this section may not be
available depending on the current source,
settings and status of the system.

Basic operation

Procedures for listening to audio from the
connected component.

1

Turn on the power of the playback

component.

2

Press

SYSTEM to turn on the power of

this system.

3

Select the source you want to playback.

Use

INPUT SELECT (or front panel INPUT)

buttons.

4

Start playback of the component you

selected in step 1.

5

Select the listening mode.

Use the listening mode buttons.

6

Press MASTER VOLUME +/– to adjust the

volume.

Auto playback

The simplest, most direct listening option is the
Auto Surround feature. With this, the system
automatically detects what kind of source
you’re playing and selects multichannel or
stereo playback as necessary.

1

While listening to a source, press AUTO/

DIRECT

2

for auto playback of a source.

Press repeatedly until

AUTO SURROUND

shows briefly in the display (it will then show
the decoding or playback format). Check the
digital format indicators in the display to see
how the source is being processed.

SYSTEM

SYSTEM

TV CONTROL

HDMI1

HDMI2

OPTICAL

LISTENING MODE

COAXIAL

STANDARD

AUTO/

DIRECT

STEREO/

A.L.C.

ADV SURR

CH

VOL

BD MENU

DIMMER

SOURCE

INPUT

INPUT

INPUT

TV CODE

ENTER

MUTE

Note

1 Stereo surround (matrix) formats are decoded accordingly using

DOLBY PLII MOVIE (see Listening in surround

sound above for more on these decoding formats).

2 For more options using this button, see Using Stream Direct on page 22.

LISTENING MODE

STANDARD

AUTO/

DIRECT

STEREO/

A.L.C.

ADV SURR

VOL

BD MENU

DIMMER

TV CODE

HTP-SB300_SVYXCN_En.book 20 ページ 2009年10月23日 金曜日 午後1時58分

Advertising