Pioneer HTP-SB300 - Manual (Page 27)

Controlling the rest of your system 05
27
En
English
Deutsch
Italiano
Español
Pyccкий
Français
Nederlands
Select preset codes for other
components
1 While pressing the button,
press and hold the ‘1’ button for three
seconds.
2 Press the INPUT SELECT button for the
component you want to control.
3 Use the number buttons to enter the
preset code.
You can find the preset codes on page 30.
If the correct code has been input the power of
the component being input will turn on or off.
The power of the component being input will
only turn on or off if that component is able to
be turned on directly by remote control.
4 Repeat steps 2 through 3 to try a different
code, or to enter a code for another
component you want to control.
5 When you’re done, press .
Clearing all the remote control
settings
You can clear all presets and restore the
factory default settings.
• While pressing the button,
press and hold the ‘0’ button for three
seconds.
Default preset codes
SYSTEM SYSTEM
TV CONTROL
HDMI1 HDMI2
OPTICAL COAXIAL CH
SOURCE INPUT
INPUT
INPUT
DISPLAY
CH
CH
ENTER
INPUT SELECT
button
Preset code
HDMI1 2 1 2 6 (BD)
HDMI2 2 1 2 2 (DVD)
OPTICAL 2 1 2 1 (DVR)
COAXIAL 1 1 2 0 (VCR)
0 1 2 0
HTP-SB300_SVYXCN_En.book 27 ページ ２００９年１０月２３日 金曜日 午後１時５８分