Pioneer HTP-SB300 - Manual (Page 29)

Controlling the rest of your system 05
29
En
English
Deutsch
Italiano
Español
Pyccкий
Français
Nederlands
Controls for other components
This remote control can control these components after entering the proper codes (see Select
preset codes for other components on page 27). To operate another component, press
INPUT
SELECT button for the component to which a preset code has been input.
Button(s) Function Components
 SOURCE Press to switch the component between standby and on. BD/DVD player, DVR, VCR
 Press to return to the start of the current track.
Repeated presses skips to the start of previous tracks. BD/DVD player, DVR, VCR
 Press to advance to the start of the next track.
Repeated presses skips to the start of following tracks. BD/DVD player, DVR, VCR
 Pause playback or recording. BD/DVD player, DVR, VCR
 Start playback. BD/DVD player, DVR, VCR
 Hold down for fast forward playback. BD/DVD player, DVR, VCR
 Hold down for fast reverse playback. BD/DVD player, DVR, VCR
 Stops playback (on some models, pressing this when the
disc is already stopped will cause the disc tray to open). BD/DVD player, DVR, VCR
Number
buttons Directly access tracks on a program source. VCR
Use to enter a title/chapter/track number. BD/DVD player, DVR
+10 button Selects tracks higher than 10. (For example, press +10
then 3 to select track 13.)
BD/DVD player, DVR
ENTER Use as the ENTER button. BD/DVD player
Displays the DISC NAVI screen for DVD recorder. DVR
DISPLAY Press to display information. BD/DVD player, DVR
TOP MENU Displays the disc ‘top’ menu of a BD/DVD player. BD/DVD player, DVR
MENU Displays menus for the current BD/DVD player or DVD
recorder you are using. BD/DVD player, DVR
,
ENTER &
RETURN Navigates BD/DVD menu/options. BD/DVD player, DVR
HOME MENU Displays the HOME MENU. BD/DVD player, DVR
CH +/– Selects channels. DVR, VCR
HDD
(SHIFT + 1) Switches to the hard disk controls when using an HDD/
DVD recorder. HDD/DVD/VCR recorder
DVD
(SHIFT + 2) Switches to the DVD controls when using an HDD/DVD
recorder. HDD/DVD/VCR recorder
VCR
(SHIFT + 3) Switches to the VCR controls when using an HDD/DVD/
VCR recorder. HDD/DVD/VCR recorder
HTP-SB300_SVYXCN_En.book 29 ページ ２００９年１０月２３日 金曜日 午後１時５８分