Pioneer HTP-SB300 - Manual (Page 9)

Installation 01
9
En
English
Deutsch
Italiano
Español
Pyccкий
Français
Nederlands
Preparing the subwoofer
• Attach the non-skid pads to the base of
subwoofer.
Use the supplied adhesive to attach four pads
to the base of subwoofer.
• The subwoofer has been designed for
normal use when placed on its side as
shown. If installing the subwoofer
vertically, affix the non-skid pads to the side
of the subwoofer as indicated in the
accompanying illustration.
Wall mounting the main unit
The main unit can be mounted on a wall if
desired. Before performing a wall mounting,
consult page 11 and complete the wiring
connections.
Caution
• Remember that the main unit is heavy and
that its weight could cause the screws to
work loose, or the wall material to fail to
support it, resulting in the unit falling.
Make sure that the wall you intend to
mount the unit on is strong enough to
support them. Do not mount on plywood or
soft surface walls. If you are unsure of the
qualities, consult a professional for advice.
• Pioneer is not responsible for any
accidents or damage that result from
improper installation, misuse or
modification of the product, or natural
disasters.
• Mounting screws and washers are not
supplied. Use screws suitable for the wall
material and support the weight of the unit.
Recommended dimensions are for a screw
4 mm in diameter and 50 mm long, with a
washer 10 mm in diameter.
Pioneer logo
For vertical installation
Ø 10 mm
Washer (not supplied):
Ø 4 mm
50 mm
maximum Ø 10 mm
Screw (not supplied):
HTP-SB300_SVYXCN_En.book 9 ページ ２００９年１０月２３日 金曜日 午後１時５８分