Connecting a tv, Connecting up, 02 chapter 2 – Pioneer BDP-51FD User Manual

Page 13

Advertising
background image

13

En

02

Chapter 2

Connecting up

Connecting a TV

Be sure to turn off the power and unplug the power cord from the
power outlet whenever making or changing connections.

Note

• Make the settings in the Setup Navigator menu according to the

type of cable connected (page 19).

Connecting using a commercially
available HDMI cable

The audio and video signals can be transferred to HDMI-compatible
devices as digital signals with no loss of sound or video quality. After
connecting, make the settings at the

Setup Navigator menu

according to the connected HDMI-compatible device (page 19).

Also refer to the operating instructions of the device being
connected.

Note

• The HDMI indicator on the player’s front panel lights when video

signals are being output from the

HDMI OUT terminal.

(Depending on the connected device, in some cases it may only
light when the player is selected as the device’s input.)

• 1080p video signals may not be output, depending on the HDMI

cable being used.

Caution

• Hold the plug when connecting and disconnecting the cable.

• Placing a load on the plug could result in faulty contact and no

video signals being output.

About HDMI

This player incorporates High-Definition Multimedia Interface
(HDMI™) technology.

The player supports Deep Color.
The conventional players can transmit a video signal with 8 bit color
depth in the YCbCr 4:4:4 or RGB formats, the players supporting
Deep Color can transmit a video signal with a color bit depth of
greater than 8 bits per color component. Subtle color gradations
can be reproduced when connected to a TV that supports Deep
Color.

HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.

R

R

AUDIO OUT (2 ch)

AUDIO OUT (7.1 ch)

VIDEO OUT

HDMI OUT

DIGITAL

OUT

CONTROL

IN

L

L

Y

PB

PR

FRONT

COAXIAL

OPTICAL

COMPONENT VIDEO

AC IN

SURROUND

CENTER

VIDEO

S-VIDEO

SUB WOOFER

SURROUND

BACK

P

B

P

R

VIDEO

S-VIDEO

HDMI OUT

R

R

AUDIO OUT (2 ch)

AUDIO OUT (7.1 ch)

VIDEO OUT

HDMI OUT

DIGITAL

OUT

CONTROL

IN

L

L

Y

PB

PR

FRONT

COAXIAL

OPTICAL

COMPONENT VIDEO

AC IN

SURROUND

CENTER

VIDEO

S-VIDEO

SUB WOOFER

SURROUND

BACK

P

B

P

R

VIDEO

S-VIDEO

HDMI OUT

Player’s rear panel

TV

Match the direction of
the plug to the terminal
and insert straight.

To HDMI input terminal

HD

MI
c

a

bl

e

(c

ommer

c

ial
ly available

)

It is also possible to
connect to an AV
receiver or amplifier
using an HDMI cable
(page 16).

Direction of
signal flow

51FD_WV_EN.book 13 ページ 2008年8月26日 火曜日 午前9時58分

Advertising