Rappel des données enregistrées – Pioneer CDJ-1000 MK3 User Manual

Page 36

Advertising
background image

Operations Using Memory Cards/Opérations utilisant des cartes mémoire

36

En/Fr <DRB1396>

To call up recorded data

To recall a memorized cue/loop point

When a memory card is loaded, and cue/loop point data is recorded, the
calendar display and playing address display will appear red.

1. Press the CUE/LOOP CALL button.

¶ When the CALL button (3) is pressed, the cue/loop points will be

called up in order, beginning with the one closest to the beginning
of the disc, and the unit will enter pause mode at the cue/loop in
point.

2. Press the PLAY/PAUSE button (

6).

¶ Play/loop play will begin.

To recall a memorized hot cue point

Hot cue points A, B, and C are recorded automatically on the memory
card. If hot cue points are recorded at the time a disc is inserted, the
HOT CUE buttons A, B, C will flash green or orange. To call up one of the
recorded hot cue points, press the corresponding button A, B, or C. The
flashing green or orange indicator will light steadily (sound will not begin
instantly when the call is made). If you have no need of calling one of the
hot cue points, press the HOT CUE REC MODE button. The indicators
will change to red, and the hot cue setting mode will be enabled. (To
subsequently call up one of the hot cue points previously recorded on
the memory card, remove the disc or memory card and reinsert it so that
the A, B, and C buttons flash once again. Then press the desired flashing
button).

WAVE display

When playing a track with which you have previously used the WAVE
display function, the recorded WAVE pattern will automatically be re-
called and displayed.

To delete information
recorded on memory cards

To delete individual cue/loop points

1. Press the CUE/LOOP CALL button.

¶ When the CALL button (3) is pressed, the cue/loop points will be

called up in order, beginning with the one closest to the beginning
of the disc, and the unit will enter pause mode at the cue/loop in
point.

2. Press the CUE/LOOP DELETE button at the cue/loop point

you wish to delete.

¶ The display will show the [DELETE] message, and the selected

cue point or loop point data will be erased from the memory card.

To delete all cue/loop point information for an

entire disc

1. Load the disc whose cue/loop point information you wish

to erase.

2. Hold the CUE/LOOP DELETE button depressed for 5 or

more seconds.

¶ The display will scroll the [DISC DELETE? PUSH MEMORY] con-

firmation message.

3. Press the CUE/LOOP MEMORY button.

¶ All cue and loop data for the loaded disc will be deleted from the

memory card.

¶ If any button other than the CUE/LOOP MEMORY button is

pressed, the delete mode will be canceled.

To delete all memory card data

1. With no disc loaded, hold the CUE/LOOP DELETE button

depressed for 5 seconds or more.

¶ The display will scroll the [ALL DELETE? PUSH MEMORY] confir-

mation message.

2. Press the CUE/LOOP MEMORY button.

¶ All data will be deleted from the memory card.

¶ If any button other than the CUE/LOOP MEMORY button is

pressed, the delete mode will be canceled.

Rappel des données enregistrées

Pour rappeler un point de repère/boucle

mémorisé

Quand une carte mémoire est installée et que des données de point de
repère/boucle sont enregistrées, l’affichage du calendrier et celui de
l’adresse de lecture apparaissent en rouge.

1. Appuyez sur le bouton CUE/LOOP CALL.

¶ Quand le bouton CALL (3) est actionné, les points de repère/bou-

cle seront rappelés dans l’ordre, en commençant par ceux situés
le plus près du début du disque et l’appareil se mettra en mode
Pause au point initial de repère/boucle.

2. Appuyez sur le bouton PLAY/PAUSE (

6).

¶ La lecture/lecture à boucle commencera.

Rappel d’un point de repère instantané mémorisé

Des points de repère instantané A, B et C sont automatiquement enregistrés
sur la carte mémoire. Si des points sont enregistrés au moment où un
disque est inséré, les boutons HOT CUE A, B, C clignotent en vert ou en
orange. Pour rappeler un de ces points de repère instantané, appuyez sur
le bouton A, B, ou C correspondant. Le voyant clignotant vert ou orange
s’allume de façon continue (le son ne commencera pas instantanément
quand le rappel est effectué). Si vous ne devez pas rappeler un point de
repère instantané, appuyez sur le bouton HOT CUE REC MODE. Les voyants
changeront en rouge et le mode de réglage des points de repère instantané
sera validé. (Pour rappeler un des points de repère instantané préalablement
enregistré sur la carte mémoire, retirez le disque ou la carte mémoire et
insérez-la à nouveau de sorte que les points A, B, et C clignotent à nouveau.
Appuyez ensuite sur le bouton clignotant souhaité.)

Affichage WAVE

À la lecture d’une plage pour laquelle vous avez préalablement utilisé la
fonction d’affichage WAVE, le motif WAVE enregistré sera
automatiquement rappelé et affiché.

Effacement d’informations
enregistrées sur des cartes mémoire

Pour effacer des points de repère/boucle individuels

1. Appuyez sur le bouton CUE/LOOP CALL.

¶ Quand le bouton CALL (3) est actionné, les points de repère/bou-

cle sont rappelés dans l’ordre, en commençant par celui le plus
près du début du disque et l’appareil se placera en mode Pause au
point initial de repère/boucle.

2. Appuyez sur le bouton CUE/LOOP DELETE au point de

repère/boucle que vous souhaitez effacer.

¶ L’affichage indique le message [DELETE] et le point de repère ou

la donnée du point de boucle sélectionné sera effacé de la carte
mémoire.

Effacement de toutes les données des points de

repère/boucle d’un disque

1. Insérez le disque dont vous souhaitez effacer toutes les

données des points de repère/boucle.

2. Appuyez sur la touche CUE/LOOP DELETE pendant 5

secondes ou plus.

¶ L’affichage fait défiler le message de confirmation [DISC DELETE?

PUSH MEMORY] (Effacement du disque? Appuyer sur MEMORY).

3. Appuyez sur la touche CUE/LOOP MEMORY.

¶ Toutes les données des points de repère et de boucle pour le

disque inséré seront effacées de la carte mémoire.

¶ Si une touche autre que CUE/LOOP MEMORY est actionnée, le

mode d’effacement sera annulé.

Effacement de toutes les données d’une carte

mémoire

1. Aucun disque n’étant inséré, maintenez la touche CUE/

LOOP DELETE enfoncée pendant 5 secondes ou plus.

¶ Le message de confirmation [ALL DELETE? PUSH MEMORY]

(Tout effacer? Appuyer sur MEMORY) défilera.

2. Appuyez sur la touche CUE/LOOP MEMORY.

¶ Toutes les données seront supprimées de la carte mémoire.

¶ Si une touche autre que CUE/LOOP MEMORY est actionnée, le

mode d’effacement sera annulé.

Advertising