Limiting stations to regional, Programming 14, Receiving traffic announcements 14 – Pioneer FH-P4100R User Manual

Page 14: Receiving traffic announcements, Rds 05, Limiting stations to regional programming

Advertising
background image

Black plate (14,1)

14CRD3576-A

Limiting stations to regional

programming

When AF is used to automatically retune fre-

quencies, the regional function limits the se-

lection to stations broadcasting regional

programs.

1 Press FUNCTION to select REG.

Press FUNCTION until REG appears in the dis-

play.

2 Press a to turn the regional

function on.

Press a and REG :ON is displayed.

3Press b to turn the regional

function off.

Press b and REG :OFF is displayed.

Notes

! Regional programming and regional

networks are organized differently depending
on the country (i.e., they may change
according to the hour, state or broadcast
area).

! The preset number may disappear on the

display if the tuner tunes in a regional station
which differs from the originally set station.

! The regional function can be turned on or off

independently for each FM band.

Receiving traffic

announcements

TA (traffic announcement standby) lets you re-

ceive traffic announcements automatically, no

matter what source you are listening to. TA

can be activated for both a TP station (a sta-

tion that broadcasts traffic information) or an

enhanced other networks TP station (a station

carrying information which cross-references

TP stations).

1 Tune in a TP or enhanced other

networks TP station.

When you are tuned into a TP or enhanced

other networks TP station the TP ( ) indica-

tor will light.

2 Press TA to turn traffic

announcement standby on.

Press TA and the T indicator appears in the

display. The tuner will standby for traffic an-

nouncements.

# To turn traffic announcements standby off,

press TA again.

3Use VOLUME to adjust the TA

volume when a traffic announcement

begins.

When you press VOLUME up/+, the volume is

raised and when pressed down/, the volume

is lowered.

The newly set volume is stored in memory and

recalled for subsequent traffic announce-

ments.

4 Press TA while a traffic

announcement is being received to cancel

the announcement.

The tuner returns to the original source but re-

mains in the standby mode until TA is pressed

again.

RDS

05

En

14

Section

Advertising