Pioneer FH-P4100R - Manual (Page 29)

Black plate (29,1)
29 CRD3576-A
Playing a CD
1 2 3
8 6 5 4 7
You can use this unit to control a multi-CD
player, which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on page 31.
1 Disc number indicator
Shows the disc currently playing.
2 Track number indicator
Shows the track currently playing.
3 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
4 SOURCE button
Press to select the multi-CD player as the
source.
5 16 buttons (Disc number search)
Press to select a disc from the multi-CD
player.
6 c/d buttons (Track search and FF/
REV)
Press to select a track from the current CD
and for fast forward and reverse.
7 a/b buttons (Disc search)
Press to select a disc from the multi-CD
player.
8 VOLUME button
Press to increase or decrease the volume.
1 Press SOURCE to select the multi-CD
player.
Press SOURCE until you see Multi-CD dis-
played.
2 Use VOLUME to adjust the sound
level.
When you press VOLUME up/+, the volume is
raised and when pressed down/, the volume
is lowered.
3Select a disc you want to listen to
with the 16 buttons.
For discs located at 1 to 6, press the corre-
sponding number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as 1 for disc 7, until the disc number ap-
pears in the display.
# You can also sequentially select a disc by
pressing a/b.
4 To perform fast forward or reverse,
press and hold c or d.
5 To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
! When the multi-CD player performs the
preparatory operations, READY is displayed.
Multi-CD Player 08
En
29
English
Section