Adjusting bbe sound level 43, Using the position selector 43, Using the position selector – Pioneer FH-P4100R User Manual

Page 43: Digital signal processor 10, Adjusting bbe sound level

Advertising
background image

Black plate (43,1)

43

CRD3576-A

# If the sound field control has been previously

set to a sound field program then the title of that
previously selected sound field program will be
displayed, such as STUDIO, JAZZ, CLUB, OCT1,
OCT2, or BBE.

2 Select a sound field program by

pressing 16.

Select the desired sound field program by

pressing one of the numbered buttons, from

16, which correspond to the different sound

field programs as listed above.

# You can also sequentially select a sound field

program by pressing c or d.

Adjusting BBE sound level

With BBE sound processing technology, you

can adjust the level of BBE.

1 Recall BBE.

See Recalling sound field programs on the pre-

vious page.

2 Press a or b to adjust the level of

BBE.

Each press of a or b increases or decreases

the level of BBE.

+4  4 is displayed as the level is increased

or decreased.

Using the position selector

One way to assure a more natural sound is to

clearly position the stereo image, putting you

right in the center of the sound field. The posi-

tion selector adjusts the volume level of sound

from each speaker to match seat positions

and the number of people in the car and lets

you recall settings at the touch of a button.

Here is a list of the positions:

Button Display

Indicator

Position

a

FRONT

Front seat

b

ALL

All seats

c

FRONT-L

Front seat left

d

FRONT-R

Front seat right

1 Press DSP to select the position

selector.

Press DSP until POSI appears in the display.

# If the position selector has been previously

set to a listening position then the title of that pre-
viously selected listening position will be dis-
played, such as FRONT, ALL, FRONT-L or
FRONT-R.

2 Press c/d/a/b to select a listening

position.

Press one of these, c/d/a/b, to select a lis-

tening position as listed in the table.

# To cancel the selected listening position,

press the same button again.
# When the rear output setting is subwoofer,

you cannot select ALL. Refer to Switching the rear
output setting on page 46.

Digital Signal Processor

10

En

43

English

Section

Advertising