Pioneer GM-X962 - Manual (Page 11)

Specifications
Power source .......................................................................................................... 14.4 V DC (10.8 — 15.1 V allowable)
Grounding system .......................................................................................................................................... Negative type
Current consumption .................................................................................................... 25.0 A (at continuous power, 4
Ω)
Average current drawn* ........................................................................................................ 9.6 A (4
Ω for two channels)
17.3 A (4
Ω for one channel)
Fuse ........................................................................................................................................................................ 25 A
× 2
Dimensions ...................................................................................................................... 279 (W)
× 61 (H) × 324 (D) mm
Weight .................................................................................................................... 5.0 kg (Leads for wiring not included)
Maximum power output .................................................................................................................. 250 W
× 2 / 760 W × 1
Continuous power output ...................................................................... 175 W
× 2 / 530 W × 1 (DIN45324, +B=14.4 V)
Load impedance .......................................................................................................................... 4
Ω (2 — 8 Ω allowable)
(Bridge connection: 4 — 8
Ω allowable)
Frequency response .......................................................................................................... 10 — 50,000 Hz (+0 dB, –1 dB)
Signal-to-noise ratio .................................................................................................................... 100 dB (IEC-A network)
Distortion ........................................................................................................................................ 0.008 % (10 W, 1 kHz)
Separation ...................................................................................................................................................... 65 dB (1 kHz)
Low pass filter .............................................................................................................................. Cut off frequency: 80 Hz
Cut off slope: –12 dB/oct
Maximum input level/impedance .................................................................................. RCA: 6.5 V/22 k
Ω (0.2 — 6.5 V)
Note:
• Specifications and the design are subject to possible modification without notice
due to improvements.
*Average current drawn
• The average current drawn is nearly the maximum current drawn by this unit
when an audio signal is input. Use this value when working out total current
drawn by multiple power amplifiers.
10
ENGLISH
ESPA
Ñ
OL
DEUTSCH
FRAN
Ç
AIS
ITALIANO
NEDERLANDS