Pioneer GM-D515 - Manual (Page 13)

Specifications
12
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
Power source .......................................................................................................... 14.4 V DC (10.8 — 15.1 V allowable)
Grounding system .......................................................................................................................................... Negative type
Current consumption .................................................................................................... 43.8 A (at continuous power, 4
Ω)
Average current drawn* ...................................................................................................... 10.9 A (4
Ω for five channels)
Fuse ........................................................................................................................................................................ 25 A
× 3
Dimensions ...................................................................................................................... 350 (W)
× 52 (H) × 268 (D) mm
Weight .................................................................................................................... 3.9 kg (Leads for wiring not included)
Maximum power output .................................................................................................... Channel A/B: 100 W
× 4 (4 Ω)
Channel SUB: 300 W
× 1 (4 Ω) / 600 W × 1 (2 Ω)
Continuous power output ............................................................................................ 65 W
× 4 (4 Ω) + 225 W × 1 (4 Ω)
(56 W
× 4 (4 Ω) + 350 W × 1 (2 Ω))
(DIN45324, +B=14.4 V)
Load impedance .................................................................................................. 4
Ω (Channel A/B: 4 — 8 Ω allowable)
(Channel SUB: 2 — 8
Ω allowable)
Frequency response .................................................................................. Channel A/B: 10 — 40,000 Hz (+0 dB, –1 dB)
Channel SUB: 5 — 240 Hz (+0.5 dB, –3 dB)
Signal-to-noise ratio ...................................................................................................................... 95 dB (IEC-A network)
Distortion .................................................................................................................... Channel A/B: 0.01% (10 W, 1 kHz)
Channel SUB: 0.03% (10 W, 120 Hz)
Low pass filter (Channel SUB) ...................................................................................... Cut off frequency: 40 — 240 Hz
Cut off slope: –12 dB/oct
High pass filter (Channel A/B) ........................................................................................ Cut off frequency: 40 — 240 Hz
Cut off slope: –12 dB/oct
Bass level control (Channel SUB) .............................................................................................................. –22 — +12 dB
(125 mV — 6.5 V)
Level/gain control (Channel A/B) ............................................................................................................ 200 mV — 6.5 V
Maximum input level/impedance .......................................................................................................... RCA: 6.5 V/22 k
Ω
Note:
• Specifications and the design are subject to possible modification without notice
due to improvements.
*Average current drawn
• The average current drawn is nearly the maximum current drawn by this unit
when an audio signal is input. Use this value when working out total current
drawn by multiple power amplifiers.