Connecting the power terminal, Connecting the unit – Pioneer GM-D515 User Manual

Page 8

Advertising
background image

7

Connecting the Unit

Connecting the Power Terminal

• Always use the special red battery and ground

wires ([RD-223]

× 2), which are sold separately.

Connect the battery wire directly to the car bat-
tery positive terminal (+) and the ground wire to
the car body.

1. Pass the battery wire from the

engine compartment to the interior
of the vehicle.

• After making all other connections to the

amplifier, connect the battery wire terminal
of the amplifier to the positive (+) terminal of
the battery.

2. Twist the battery wire, ground wire

and system remote control wire.

3. Attach lugs to wire ends. Lugs not

supplied.

• Use pliers, etc., to crimp lugs to wires.

4. Connect the wires to the terminal.

• Fix the wires securely with the terminal

screws.

WARNING

Failure to securely fasten the battery wire to the ter-
minal using the terminal screws could cause the ter-
minal area to overheat and could result in damage
and injury including minor burns.

Engine
compart-
ment

Interior of
the vehicle

Drill a 14 mm
hole into the
vehicle body.

Insert the O-ring rubber
grommet into the vehicle
body.

Positive terminal

Twist

Battery wire

Ground wire

Lug

Lug

Fuse (30 A)

Fuse (30 A)

GND terminal

Power terminal

Battery wire

System remote
control terminal

System remote
control wire

Ground wire

Advertising