Digital signal processor, Introduction of dsp adjustments 73, Using the sound field control 73 – Pioneer AVH-P5900DVD User Manual

Page 73: Available accessories, Introduction of dsp adjustments, Using the sound field control

Advertising
background image

Digital Signal Processor

Introduction of DSP adjustments

You can use this unit to control multi-channel
processor (e.g. DEQ-P6600), which is sold sepa-
rately.
! Some functions may differ depending on the

multi-channel processor connected to this
unit.

Important

When a multi-channel processor and an optional
DVD player are connected to this unit, be sure to
use an optical cable (e.g., CD-AD600).

1

1 DSP display

Shows the DSP function names.

By carrying out the following settings/adjust-
ments in the order shown, you can create a fi-
nely-tuned sound field effortlessly.

1

Setting the speaker setting

2

Using the position selector

3

Auto TA and EQ (auto-time alignment and auto-
equalizing)

4

Adjusting the time alignment

5

Adjusting the speaker output levels using a
test tone

6

Selecting a cross-over frequency

7

Adjusting the speaker output levels

8

Adjusting 3-band parametric equalizer

1

Touch A.MENU and then touch

DSP MENU to display the DSP function
names.
The DSP function names are displayed and
operable ones are highlighted.

# To go to the next group of function names,
touch

NEXT.

# To return to the previous group of function
names, touch

PREV.

# When playing discs recorded with more than
96 kHz sampling frequency, you cannot use audio
functions. Also, equalizer curve setting,
POSITION, AUTO EQ and AUTO TA will be can-
celled.
# When playing discs recorded with more than
96 kHz sampling frequency, audio is outputted
from front speakers only.
# When selecting the FM as the source, you
cannot switch to

SLA.

# When playing other than the DVD disc, you
cannot switch to

DYNAMIC RANGE CONTROL.

# When neither FRONT-L nor FRONT-R is se-
lected in

POSITION, you cannot switch to

TIME ALIGNNMENT.
# When both the center speaker and the rear
speaker are set to OFF in the speaker setting, you
cannot switch to

DOLBY PRO LOGIC II.

2

Touch ESC to return to the ordinary dis-

play.

# To return to the previous display, touch BACK.

Using the sound field control

The SFC function creates the sensation of a
live performance.

Available accessories

En

73

Section

04

A

vailable

accessories

Advertising