Using the equalizer 80, Adjusting the time alignment, Available accessories – Pioneer AVH-P5900DVD User Manual

Page 80: Using the equalizer

Advertising
background image

! ADJUSTMENT – Adjust the time alignment

as desired

# You cannot select AUTO TA if auto TA and EQ
has not been carried out.
# You cannot select ADJUSTMENT when
neither

FRONT-L nor FRONT-R is selected in

POSITION.

Adjusting the time alignment

You can adjust the distance between each
speaker and the selected position.
! An adjusted time alignment is memorized

in

CUSTOM.

1

Touch NEXT on the DSP function menu.

2

Touch TIME ALIGNNMENT and then

touch ADJUSTMENT.

# You cannot select ADJUSTMENT when
neither

FRONT-L nor FRONT-R is selected in

POSITION.

3

Touch a or b to select the speaker to

be adjusted.
Each time you touch a or b selects the speak-
er in the following order:
FRONT L (front speaker left)

—CENTER (center

speaker)

—FRONT R (front speaker right)—

REAR R (rear speaker right)

—REAR L (rear

speaker left)

—SUB WOOFER (subwoofer)

# You cannot select speakers whose size is set
at

OFF. (Refer to Setting the speaker setting on

page 77.)

4

Touch c or d to adjust the distance be-

tween the selected speaker and the listen-
ing position.
Each time you touch c or d increases or de-
creases the distance.

0.0cm to 500.0cm is dis-

played as the distance is increased or
decreased.

Using the equalizer

The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.

Recalling equalizer curves

There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:

Display

Equalizer curve

POWERFUL

Powerful

NATURAL

Natural

VOCAL

Vocal

FLAT

Flat

CUSTOM1

Custom 1

CUSTOM2

Custom 2

SUPER BASS

Super bass

! CUSTOM1 and CUSTOM2 are adjusted

equalizer curves.

! When FLAT is selected no supplement or

correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.

% On the normal display, touch EQ to se-
lect the equalizer.
Touch

EQ repeatedly to switch between the fol-

lowing equalizers:
POWERFUL

—NATURAL—VOCAL—FLAT—

CUSTOM1

—CUSTOM2—SUPER BASS

# If SFC instead of EQ appears on the normal
display, touch

SFC and hold to switch to equalizer

function. About SFC, refer to Using the sound
field control on page 73.

Available accessories

En

80

Section

04

Advertising