Pioneer RS-D7R - Manual (Page 88)

87
Installing the Remote Control Unit
Installation Using the Mounting Base and the Bracket
Precaution:
• To avoid it being a hindrance to driving, always install the remote control unit to the passenger’s
side – not the driver’s side.
• Install the mounting base so that the remote control unit is slanting upwards at an angle when
fitted.
• Before using double-sided tape, clean off any dirt on the surface to which the double-sided tape is
to be attached.
• Before drilling any mounting holes, confirm that the screws will not interfere with any of the cars oper-
ating systems (such as the fuel line, brake lines, electrical wiring, etc.).
Method A
This example is for when the console is wide enough to have installation space for the mount-
ing base.
Method B
This example is for when the console is not wide enough to have installation space for the
mounting base.
Note:
• Install the mounting base in such a way that it will not hit the seat when the seat is adjusted.
Fig. 18
Fig. 19