Pioneer VSX-819H-S - Manual (Page 69)

Additional information 12
69
En
English
Français
Italiano
Español
Nederlands
Deutsch
iPod messages
USB messages
Symptom Cause Action
iPod/USB Error 1
(I/U ERR1)
There is a problem with the signal path from the
iPod to the receiver. Switch off the receiver and reconnect the iPod to
the receiver. If this doesn’t seem to work, try
resetting your iPod.
iPod/USB Error 2
(I/U ERR2)
The software version being used with the iPod
needs to be updated. Update the software being used with the iPod
(please use the latest iPod software versions
later than the iPod updater 2004-10-20).
An iPod not supported by this receiver is
connected. Connect the iPod supported by this receiver.
iPod/USB Error 3
(I/U ERR3)
When there is no response from the iPod. Update the iPod software to the latest version. If
this doesn’t seem to work, try resetting your iPod.
No Track When there are no tracks in the category
selected on the iPod. Select a different category.
Symptom Cause Action
iPod/USB Error 1
(I/U ERR1)
There is a problem with the signal path from the
USB to the receiver. Switch off the receiver and reconnect the USB to
the receiver.
iPod/USB Error 3
(I/U ERR3)
When there is no response from the USB. Switch off the receiver and reconnect the USB to
the receiver.
iPod/USB Error 4
(I/U ERR4)
The power requirements of the USB device are
too high for this receiver. Switch off the receiver and reconnect the USB to
the receiver.
VSX-819H_MYS.book 69 ページ ２００９年１月１６日 金曜日 午後８時３４分