Pioneer DDJ-SB - Manual (Page 10)

En 10
Basic Operation
Connections
1 Connect headphones to one of the [HEADPHONES]
terminals.
0
Headphones
2 Connect such devices as a power amplifier, powered
speakers, etc., to the [MASTER OUT] terminals.
0
Power amplifier, powered speakers, etc.
R L
MASTER OUT
L R
! For details on the connections of the input/output terminals, see
Connections (p.7).
3 Turn on the computer’s power.
4 Connect this unit to your computer via a USB cable.
0
Computer
USB
R L
MASTER OUT
! For Windows users
The message [Installing device driver software] may appear when
this unit is first connected to the computer or when it is connected to
a different USB port on the computer. Wait a while until the message
[Your devices are ready for use] appears.
5 Turn on the power of the devices connected to the
output terminals (power amplifier, powered speakers,
etc.).
! When a microphone is connected to input terminals, the power of
the microphone also turns on.