Pioneer AVH-X8600BT - Manual (Page 6)

< CRD4782-A >6
6
Engb
Connecting the MirrorLink™
device
The USB interface cable for use with
MirrorLink™ devices (CD-MU200) (sold
separately) is required for the connection.
USB cable
1.5 m
USB - micro USB cable
(Type USB A - micro USB B)
(supplied with CD-MU200)
This product
MirrorLink device
USB port 2
Note
For details on how to connect an external
device using a separately sold cable, refer to
the manual for the cable.
Securing the High Speed
HDMI® Cable
Be sure to fix the High Speed HDMI® Cable
with the lock tie, when you connect the
external device with the High Speed HDMI®
Cable.
1 Insert the High Speed HDMI®
Cable into the HDMI port.
2 Wrap the lock tie around the hook
above the HDMI port and the High
Speed HDMI® Cable, and then
tighten it to secure the High Speed
HDMI® Cable.
1
2
3
1 Hook
2 Lock tie
3 High Speed HDMI® Cable
p Do not tighten up the lock tie more than
necessary.
Connecting a rear view
camera
When this product is used with a rear view
camera, it is possible to automatically
switch from the video to rear view image
when the gearstick is moved to REVERSE
(R). Camera View mode also allows you to
check what is behind you while driving.
WARNING
USE INPUT ONLY FOR REVERSE OR
MIRROR IMAGE REAR VIEW CAMERA.
OTHER USE MAY RESULT IN INJURY OR
DAMAGE.
CAUTION
The screen image may appear reversed.
The rear view camera is used as an aid to
keep an eye on trailers, or backing into a
tight parking spot. Do not use this func-
tion for entertainment purposes.
Objects in rear view may appear closer or
more distant than in reality.
Please note that the image area shown
by the rear view camera may differ
slightly when full-screen images are
displayed when backing and when
checking the rear of the vehicle while
moving forward.
Rear view camera
(ND-BC6)
(sold separately)
This product
Brown (BC IN)
RCA cable
(supplied with ND-BC6)
Violet/white
(REVERSE-GEAR SIGNAL
INPUT)
To video output
Power cord
Power supply
For more details about the wiring, refer to
Connecting the power cord on page 3.
Notes
This mode is available when the rear
view camera setting is set to “On”. (For
details, refer to Operation Manual.)
Connect this product to the rear view
camera only. Do not connect to any other
equipment.
Connecting the external video
component
■ Using AV input
To video output To audio outputs
External video
component
(sold separately)
This product
Red, white
(AUDIO INPUT)
RCA cables
(sold separately)
Yellow
(VIDEO INPUT)
23 cm 15 cm
Note
This mode is available when the setting of
AV input is set to “On”. (For details, refer to
Operation Manual.)