Turning off the power, Turning off the power -7, To the – Toshiba Satellite A110 (PSAB0) User Manual

Page 53: Turning, Off the power, Shut down mode (boot mode), Hibernation mode

Advertising
background image

User’s Manual

3-7

Getting Started

Turning off the power

The power can be turned off in one of three modes, either Shutdown Mode

(also known as Boot Mode), Hibernation Mode or Standby Mode.

Shut Down mode (Boot mode)

When you turn off the power in Shut Down mode, no data is saved and the

computer will boot to the operating system's main screen.
1. If you have entered data, save it to the hard disc, to writable optical

media or to a disc.

2. Make sure all disc activity has stopped, then remove the optical disc or

floppy disc.

3. Click Start and click Shut Down. From the Shut Down window click

Turn Off.

4. Turn off the power to any peripheral devices.

Hibernation mode

The hibernation feature saves the contents of memory to the hard disc

when the computer is turned off. The next time the computer is turned on,

the previous state is restored. The hibernation feature does not save the

status of peripheral devices.

Benefits of Hibernation

The hibernation feature provides the following benefits:

Can be configured so that data is automatically saved to the hard disc

before the computer shuts down because of a low battery.

Make sure the built-in hard disc drive and optical disc drive indicators

are off before you switch the computer off. If you turn off the power while a

disc is being accessed, you can lose data or damage the disc.

Do not turn the computer or devices back on immediately. Wait a moment

to let all capacitors fully discharge.

1. While entering hibernation mode, the computer saves the contents of

memory to the Hard disc Drive. Data will be lost if you remove the

battery or disconnect the AC adapter before the save is completed.

Wait for the Built-in Hard disc Drive indicator to go out.

2. Do not install or remove a memory module while the computer is in

hibernation mode. Data will be lost.

For the computer to shut down in hibernation mode, the hibernation feature

must be enabled in two places in Power Options: Hibernate tab and

TOSHIBA Power Saver: Basic Setup tab. Otherwise, the computer will

shut down in Standby mode. If battery power becomes depleted, data

saved in Standby will be lost.

Advertising
This manual is related to the following products: