Toshiba Magnia 560S - Manual (Page 116)

Starting the MegaRAID BIOS Configuration Utility 98
MegaRAID BIOS Configuration Utility
Configuration Utility Configure Menu
Select the Configure option to select a method for configuring arrays and logical drives,
and clear a configuration. Table 9.2 describes the types of configuration.
Table 9.2 Configuration Menu Options
Option Description
Easy Configuration Select this method to perform a basic logical
drive configuration where every physical array
you define is automatically associated with
exactly one logical drive. See "Using Easy
Configuration," for additional information.
New Configuration Select this method to discard the existing
configuration information and to configure new
arrays and logical drives. In addition to
providing the basic logical drive configuration
functions, New Configuration allows you to
associate logical drives with multiple or partial
arrays. See Section "Using New Configuration,"
for additional information.
View/Add Configuration Select this method to examine the existing
configuration and/or to specify additional arrays
and logical drives. View/Add Configuration
provides the same functions available in New
Configuration. See Section "Using View/Add
Configuration," for additional information.
Clear Configuration Select this option to erase the current
configuration information from the MegaRAID
controller non-volatile memory.
Configuration Utility Initialize Menu
Select this option from the Configuration Utility main menu to initialize one or more
logical drives. This action typically follows the configuration of a new logical drive.
See page "Initializing Logical Drives," for additional information.
WARNING: Initializing a logical drive destroys all data on the logical drive.