Toshiba Magnia 560S - Manual (Page 142)

Sarting the WebBIOS Utility on the Host Computer 124
WebBIOS Configuration Utility
Starting the WebBIOS Utility on the Host Computer
When the host computer boots, hold the <Ctrl> key and press the <H> key when the
following appears:
Copyright (c) LSI Logic Corporation
Press <Ctrl><M> to Run Configuration Utility
Or press <Ctrl><H> for WebBIOS
After you press <Ctrl><H>, the Adapter Selection screen displays. You can use this
screen to select the adapter that you want to configure RAID arrays and logical drives
for. Select an adapter and press the Start button to begin the configuration.
If you want to use the BIOS Configuration Utility instead of WebBIOS, click on the
Control-M button. The BIOS Configuration Utility is also used to configure and
maintain RAID arrays and logical drives. One difference between the utilities is that
WebBIOS can perform reconstructions, but the BIOS Configuration Utility cannot.