Toshiba Magnia 560S - Manual (Page 167)

Installing Toshiba SNMP Agent
Installing Power Console Plus
149
11. Reboot your system for Power Console Plus to take effect.
Figure 11.1 shows the layout of a sample Power Console Plus network.
Figure 11.1 Sample Power Console Plus Network Layout
Installing a Toshiba SNMP Agent
The following instructions installs the Toshiba SNMP agent on a Server.
SNMP Installation Prerequisites
You must be running Windows 2000 in the system where SNMP will be installed. The
LAN cards must be configured with TCP/IP. Ping all IP addresses to make sure the
connections are good.
Installation of SNMP Agent
1. Insert the MegaRAID Drivers & Utilities CD in the CD-ROM drive.
2 Click on Start, click on Run, and choose Browse for the CD-ROM drive.
3. Select SETUP.EXE from the Power Console Plus installation CD and click on OK.
4. Select SNMP from the menu. The SNMP agent is now installed.