Toshiba Magnia 560S - Manual (Page 169)

De-registering and Re-registering under Power Console Plus
Installing Power Console Plus
151
Editing the HOSTS File for a RAID Registration Server
Use the following procedure if installing Power Console Plus on a server that is the
registration server.
1. Type:
LOAD EDIT
at the NetWare prompt and press <Enter>.
2. Press the <Ins> key and select SYS volume.
3. Select the ETC directory. Select the Hosts file and press <Enter>.
4. Add the TCP/IP addresses and names of all servers that are registering into the
registration server.
5. Add the TCP/IP address and name of the registration server (the server you are
currently working on.)
Editing REGSERV.DAT for a RAID Server or Registration Server
1. Type:
LOAD EDIT
at the NetWare prompt and press <Enter>.
2. Press the <Ins> key and select SYS volume.
3. Select the ETC directory. Select the REGSERV.DAT file and press <Enter>.
4. Add the name of the registration server (the server you are currently working on.)
De-registering and Re-registering under Power
Console Plus
If the registration server fails or is shut down, the other RAID servers or clients must
log back into the registration server after the registration server has been restored to an
online condition. RAID servers can register into the registration servers without
resetting. The online command instructions for registering and de-registering under
each operating system are:
Operating System De registering Re registering
Windows 2000 Select RAID Server on the task
bar using a right mouse click
and select CLOSE. Execute MegaRAID
Server from the
MegaRAID Console
menu.