Toshiba Magnia 560S - Manual (Page 197)

Step 2 Choose an Adapter
Configuring Arrays and Logical Drives with Power Console Plus
179
Step 2 Choose an Adapter
Choose the adapter to be configured. If the current adapter is not the adapter to be
configured, click on the Adapter box and select the correct adapter.
Step 3 Run the Wizard
If the RAID system is already up and running and you would like to reconfigure the
adapter, choose Rescan from the Adapter menu to make sure that Power Console Plus
recognizes all physical drives. Choose Wizard from the Configuration menu. The
Wizard screen appears as follows. Choose Custom or Automatic. Click on the Next
button.
Types of Configuration
You can choose either Custom or Automatic configuration. Table 13.2 explains these
options.
Table 13.2 Configuration Types
Type Description
Custom You define the arrays and logical drives, and set parameters.
Select this option if you have specific requirements for the RAID
system.
Automatic Power Console Plus Wizard automatically defines arrays and
logical drives, and automatically sets all parameters.
Click on the Redundancy box to instruct the Wizard to
automatically configure redundant arrays when possible.
Select this option to configure an optimal RAID system.