Toshiba PORTEGE R700 - Manual (Page 166)

Problem Procedure
External devices
connected to the
compatible ports do
not work when
connected to a
compatible port. Some external devices may not work when
connected to a compatible port if the USB Sleep
and Charge function is enabled.
Reconnect the external device after turning the
computer ON.
If the external device still does not work, connect
device to an USB port that does not have the USB
Sleep and Charge function-compatible icon ( ) or
change to disable the USB Sleep and Charge
function.
The "USB Wakeup
function" does not
work. When USB Sleep and Charge function is enabled,
the "USB WakeUp" function does not work for
ports that support the USB Sleep and Charge
function.
In that case, use an USB port that does not have
the USB Sleep and Charge function-compatible
icon ( ) or change to disable USB Sleep and
Charge function.
eSATA device
In addition to the information in this section, please also refer to the
documentation supplied with your eSATA device.
Problem Procedure
eSATA device does
not work Remove the eSATA device from the computer and
then reconnect it to a free port it in order to ensure
it is firmly attached.
A connected eSATA device may not be recognized
if it is connected to the computer's eSATA/USB
combo port while the computer is in Sleep Mode or
Hibernation Mode. If this occurs, disconnect the
eSATA device and then reconnect the device while
the computer is turned on.
Ensure that any required eSATA device drivers are
properly installed - to achieve this you should refer
to both the device documentation and the
operating system documentation.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
PORTÉGÉ R700 / Satellite R630
8-18 User's Manual