Toshiba PORTEGE R700 - Manual (Page 61)

Inserting a PC Card
The Windows hot-install feature allows you to insert PC Cards while the
computer is turned on.
Do not insert a PC Card while the computer is in Sleep Mode or
Hibernation Mode as you may find that some cards do not work properly.
To insert a PC Card, follow the steps as detailed below:
1.
Press the PC Card eject button in order to eject the Dummy card
partially out of the computer.
2. Grasp the Dummy card and draw it.
3. Insert the PC Card into the PC Card slot on the right side of the
computer.
4. Press the PC Card gently to ensure a firm connection is made.
Figure3-1Inserting the PC Card
1
1. PC Card
5. After inserting the PC Card, you should refer to its documentation and
also check the configuration in Windows in order to ensure that it is
correct.
Removing a PC Card
To remove a PC Card, follow the steps as detailed below.
1.
Open the Safely Remove Hardware and Eject Media icon on the
Windows Taskbar.
2. Point to PC Card and click the left Touch Pad control button.
3. Press the PC Card eject button to extent it.
If the PC card is not inserted all the way, the eject button may not cause it
to pop out sufficiently to allows it to be grasped. Be sure to push the PC
card firmly into the computer and press the eject button again.
PORTÉGÉ R700 / Satellite R630
3-16 User's Manual