Toshiba PORTEGE R700 - Manual (Page 95)

4. Press gently at the center of the CD/DVD until you feel it click into
place. The CD/DVD should lie below the top of the spindle, flush with
the spindle base.
5. Push the center of the disc tray to close it. Press gently until it locks
into place.
If the CD/DVD is not seated properly when the disc tray is closed, the CD/
DVD might be damaged. Also, the disc tray might not open fully when you
press the eject button.
Figure4-6Closing the CD/DVD disc tray
Removing discs
To remove the CD/DVD, follow the steps as detailed below:
Do not press the eject button while the computer is accessing the media
drive. Wait for the optical disc drive indicator to go out before you open the
disc tray. Also, if the CD/DVD is spinning when you open the disc tray, wait
for it to stop before you remove it.
1. To pop the disc tray partially open, press the eject button. Gently pull
the disc tray out until it is fully opened.
When the disc tray pops open slightly, wait a moment to make sure the CD/
DVD has stopped spinning before pulling the disc tray fully open.
PORTÉGÉ R700 / Satellite R630
User's Manual 4-15