Toshiba PORTEGE R700 - Manual (Page 97)

Figure4-9Manual release with the eject hole
1
Φ 1.0mm
1. Eject hole
Turn off the power before you use the eject hole. If the CD/DVD is spinning
when you open the disc tray, the CD/DVD could fly off the spindle and
cause injury.
Writing CD/DVDs
You can use the DVD Super Multi drive to write data to either CD-R, CD-
RW, DVD-R, DVD-RW, DVD+R, DVD+RW or DVD-RAM discs.
You can use the DVD Super Multi drive Double Layer to write data to either
CD-R, CD-RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD
+RW or DVD-RAM discs.
The TOSHIBA Disc Creator is provided as writing software with this
computer.
Please refer to the Writable discs , chapter 2 for details about the types
of writable CD and DVD discs that can be supported by this computer.
Do not turn off the power to the optical disc drive while the computer is
accessing it as this may cause you to lose data.
To write data to CD-R/-RW media, use the TOSHIBA Disc Creator
feature that is installed on your computer.
When the power of the optical disc drive is off, the disc tray will not
open even if the eject button is pushed. Use the ODD to turn the
power of the optical disc drive on. Please refer to Chapter 5,
Hot Keys .
When writing information to media using an optical drive, you should
always ensure that you connect the AC adaptor to a live power socket. It is
possible that, if data is written while powered by the battery pack, the write
PORTÉGÉ R700 / Satellite R630
User's Manual 4-17