Troubleshooting and routine maintenance 11 - 18 – Brother IntelliFax-2820 User Manual

Page 106

Advertising
background image

Troubleshooting and routine maintenance

11 - 18

11

Black toner marks across the page

The drum unit may be damaged. Put in a new drum unit (See Replacing the drum
unit (DR-350)
on page 11-27)
.

Make sure that you use paper that meets our specifications. (See About paper on
page 1-8.
)

If you use label sheets for laser printers, the glue from the sheets may sometimes
stick to the OPC drum surface. Clean the drum unit. (See Cleaning the drum unit
on page 11-17.
)

Do not use paper that has clips or staples because they will scratch the surface of
the drum.

If the unpacked drum unit is in direct sunlight or room light, the unit may be
damaged.

White lines across the page

Make sure that you use paper that meets our specifications. A rough surfaced
paper or thick print media can cause the problem.

Make sure that you choose the appropriate media type in the printer driver or in
the machine’s Paper Type menu setting. (See About paper on page 1-8 and Basic
tab
in the Software User’s Guide on the CD-ROM
.)

The problem may disappear by itself. Print multiple pages to clear this problem,
especially if the machine has not been used for a long time.

The drum unit may be damaged. Put in a new drum unit. (See Replacing the drum
unit (DR-350)
on page 11-27.
)

Lines across the page

Clean the inside of the machine and the primary corona wire in the drum unit. (See
Cleaning the corona wire on page 11-24.
)

The drum unit may be damaged. Put in a new drum unit. (See Replacing the drum
unit (DR-350)
on page 11-27.
)

Black lines down the page

Printed pages have toner stains down
the page.

Clean the primary corona wire of the drum unit.

Make sure the primary corona wire blue tab is at the home position (

▲).

The drum unit may be damaged. Install a new drum unit. (See Replacing the drum
unit (DR-350)
on page 11-27.
)

The toner cartridge may be damaged. Put in a new toner cartridge. (See Replacing
the toner cartridge (TN-350)
on page 11-24.
) Make sure that a torn piece of paper
is not inside the machine covering the laser scanner window.

The fixing unit may be smudged. Call Brother Customer Service at
1-800-284-4329 (in USA) or 1-877-BROTHER (in Canada).

White lines down the page

You may clear the problem by wiping the laser scanner window with a soft cloth.
(See Cleaning the laser scanner window on page 11-22.)

The toner cartridge may be damaged. Put in a new toner cartridge. (See Replacing
the toner cartridge (TN-350)
on page 11-24.
)

Page skewed

Make sure the paper or other print media is loaded properly in the paper tray and
that the guides are not too tight or too loose against the paper stack.

Set the paper guides correctly.

If you are using the manual feed slot, see To load paper or other media in the
manual feed slot
on page 1-11
.

The paper tray may be too full.

Check the paper type and quality. (See About paper on page 1-8.)

Curl or wave

Check the paper type and quality. High temperatures and high humidity will cause
paper to curl.

If you don’t use the machine very often, the paper may have been in the paper tray
too long. Turn over the stack of paper in the paper tray. Also, fan the paper stack
and then rotate the paper 180° in the paper tray.

Examples of poor print quality

Recommendation

ABCDEFGH
abcdefghijk

A B C D
a b c d e
0 1 2 3 4

ABCDEFGH
abcdefghijk

A B C D
a b c d e
0 1 2 3 4

ABCDEFGH
abcdefghijk

A B C D
a b c d e
0 1 2 3 4

ABCDEFGH
abcdefghijk

A B C D
a b c d e
0 1 2 3 4

ABCDEFGH
abcdefghijk

ABCD
abcde
01234

ABCDE

FGH

abcdefg

hijk

A B C D
a b c d e
0 1 2 3 4

Advertising
This manual is related to the following products: