Load document, Using the automatic document feeder (adf), Load document -7 – Brother IntelliFax-2820 User Manual

Page 25: Using the automatic document feeder (adf) -7

Advertising
background image

Chapter 1

1 - 7

Load document

You can send a fax, make copies, and scan
from the ADF (automatic document feeder).

Note

The Scan feature is not available for
FAX-2820, FAX-2910 and FAX-2920.

Using the automatic
document feeder (ADF)

FAX-2820 and MFC-7220:

The ADF can hold up to 20 pages, feeding
each one individually through the machine.
Use standard 20 lb (80 g/m

2

) paper and

always fan the pages before putting them in
the ADF.

FAX-2910, FAX-2920 and MFC-7225N:

The ADF can hold up to 30 pages, if you
stagger the pages and meet the following
conditions:

Temperature:

68° F - 86° F (20° - 30°C)

Humidity:

50% - 70%

Paper:

Xerox 4200 or Xerox 4024
(20 lb/Letter)

Make sure documents written with ink are
completely dry.

Documents to be faxed must be from 5.8
to 8.5 in. (147.3 to 215.9 mm) wide and
3.9 to 14 in. (100 to 356 mm) long.

1

Pull out the ADF document support.

2

Fan the pages well. Make sure you put
the documents face down, top edge
first
in the ADF until you feel them touch
the feed roller.

3

Adjust the paper guides to fit the width of
your documents.

CAUTION

DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled,
paper-clipped, pasted or taped.

DO NOT use cardboard, newspaper or
fabric.

CAUTION

DO NOT pull on the document while it is
feeding.

Advertising
This manual is related to the following products: