Brother IntelliFax-2820 - Manual (Page 49)

Chapter 3
3 - 5
Contrast
If your document is very light or very dark, you
may want to change the contrast.
Use Light to send a light document.
Use Dark to send a dark document.
1
If it is not illuminated in green, press
(Fax).
2
Load your document.
3
Press Menu/Set, 2, 2, 1.
4
Press
▲ or ▼ to select Auto, Light or
Dark .
Press Menu/Set.
Fax Resolution
After you load the document, you can use the
Resolution key to change the setting
temporarily (for this fax only). In Fax mode
, press Resolution and
▲ or ▼ to
select the setting you want, and then press
Menu/Set.
—OR—
You can change the default setting:
1
If it is not illuminated in green, press
(Fax).
2
Press Menu/Set, 2, 2, 2.
3
Press
▲ or ▼ to select the resolution
you want.
Press Menu/Set.
1.Contrast
Standard Suitable for most typed
documents.
Fine Good for small print and
transmits a little slower
than Standard resolution.
S.Fine Good for small print or
artwork and transmits
slower than Fine
resolution.
Photo Use when the document
has varying shades of gray
or is a photograph. This
has the slowest
transmission time.
2.Fax Resolution