8 making copies, Using the machine as a copier, Enter copy mode – Brother IntelliFax-2820 User Manual

Page 76: Making a single copy, Making copies, Using the machine as a copier -1, Enter copy mode -1 making a single copy -1

Advertising
background image

8 - 1

8

8

Using the machine as a
copier

You can use your machine as a copier,
making up to 99 copies at a time.

Enter Copy mode

Before making copies, make sure that

(Copy) is illuminated in green. If it is

not, press

(Copy) to enter Copy mode.

The default setting is Fax mode. You can
change the number of seconds or minutes
that the machine stays in Copy mode. (See
Setting the Mode Timer (FAX-2820,
FAX-2910 and FAX-2920 only)
on page 2-3
or Setting the Mode Timer (MFC-7220 and
MFC-7225N only)
on page 2-3.
)

The printable area of your machine begins at
approximately 0.16 in. (4 mm) from both
sides and 0.12 in. (3 mm) from the top or
bottom of the paper.

Note

This printable area shown above is for a
single copy or a 1 in 1 copy using Letter or
Legal size paper. The printable area changes
with the paper size.

Making a single copy

1

Press

(Copy) to illuminate it in

green.

2

Load your document.
(See Load document on page 1-7.)

3

Press Start.

Making copies

Copy Ratio

The LCD shows the default copy setting

Quality

No. of Copies

0.16" (4 mm)

0.12" (3 mm)

Unprintable
area

Advertising
This manual is related to the following products: