Sharp Moduł ochrony danych - Manual (Page 13)

11
ENGLISH
DISABLING RESEND KEY
This setting is used to disable display of the [RESEND] key, which is used to transmit to the
last destination transmitted to. To disable display of the [RESEND] key, touch the checkbox
so that a checkmark appears. When the [RESEND] key is disabled, it will not appear in the
main screens of fax mode, Internet fax mode and scanner mode (page 1-4 of the Facsimile
Expansion Kit AR-FX12 manual and page 1-11 of the "OPERATION MANUAL (for image
send)"). (Normally the key appears in these screens.)
This function is initially disabled.
RELEASE THE LOCK ON DOCUMENT FILING OUTPUT OPERATION
This setting is used when a file or folder has been locked (operation is prohibited) due to
entry of an incorrect password. Touch the [RELEASE] key in the "RELEASE THE LOCK ON
DOCUMENT FILING OUTPUT OPERATION" screen to release all locked files and folders.
When there are no locked files or folders, the "RELEASE THE LOCK ON DOCUMENT
FILING OUTPUT OPERATION" is grayed out in the "SECURITY SETTINGS" menu screen.
PRODUCT KEY
To initially enable the security function, you must use a administrator setting to enter the
product key (password). The name of the administrator setting used for this purpose is
"DATA SECURITY KIT". Please ask your dealer for the product key.
Touch the [DATA SECURITY KIT] key, enter the product key with the numeric keys, and then
touch the [ENTER] key.
● If an incorrect number is entered...
A message will appear instructing you to check the product key number again.
● If the correct number is entered...
A message will appear instructing you to turn the power off and then on. Touch the [OK]
key when you have finished reading the message. Turn first the power switch off. The
security function will be enabled when the power is turned on again.
Once the security function is enabled, the [DATA SECURITY KIT] key will no longer
appear in the product key entry screen.
MX-FRX6U.book 11 ページ ２００７年６月１８日 月曜日 午前１１時５９分