Sharp Moduł ochrony danych - Manual (Page 5)

3
ENGLISH
When the data security kit is installed
When the data security kit is installed, the following icon
appears on the touch panel. Touch the icon (
) to view
information on the data security kit version.
When the data security kit is installed, data remaining in the machine is automatically
erased after each copy and fax job.
When data clearing begins, the following message appears for 6 seconds*.
* The duration of the message display can
be changed with the administrator setting,
"MESSAGE TIME SETTING". (See page
10 of the administrator settings guide.)
About confidential folders and confidential files of
the document filing function
If an incorrect password is entered three times in a row for a specific confidential folder or
file on a machine that has the data security kit installed, the folder or file will be locked (no
operation will be permitted using that folder or file). To unlock the folder or file, "RELEASE
THE LOCK ON DOCUMENT FILING OUTPUT OPERATION" (page 11 of this manual) in
the administrator settings must be used.
Restrictions on tandem copying and tandem printing
Tandem copying and tandem printing operate as shown below based on the configuration of
the server machine and client machine (whether or not the data security kit is installed).
NOTE
If the machine power is turned off while image data is being cleared from the hard disk
drive or before jobs are finished, the data may not be completely erased. If you do not
wish to leave partially cleared data when the power is turned off, it is recommended that
you use the administrator setting, "CLEAR ALL MEMORY" (page 6 of this manual), to
complete data clearing before turning off the power.
Client machine
Data security kit: Yes Data security kit: No
Server
machine
Data security kit:
Yes The tandem function can
be used. Data is cleared
from both the server and
client machines. The tandem function
cannot be used.
Data security kit:
No The tandem function can
be used. Data is cleared
from the client machine. The regular tandem
function can be used.
DATA IS BEING CLEARED.
MX-FRX6U.book 3 ページ ２００７年６月１８日 月曜日 午前１１時５９分