Care and cleaning – Sharp SJ-FS820VSL User Manual

Page 18

Advertising
background image

18

WARNING

Unplug the refrigerator fi rst to prevent electric shock.

Do not splash water directly on the outer cabinet or the

interior. This may lead to rusting and deterioration of the

electrical insulation.

IMPORTANT

To prevent cracking on inside surfaces and plastic

components, follow these tips.

Wipe any food oils adhered to plastic components.

Some household chemicals may cause damage, so use only

diluted washing-up liquid (soapy water).

If undiluted detergent is used or soapy water is not wiped off

thoroughly, cracking of plastic parts can result.

1

Remove the water tank and clean and dry it thoroughly to

prevent water stain or bacteria from being attached. (Once

a week)

2

Remove the accessories e.g. shelves from the cabinet and

door. Wash them in warm soapy dishwashing water; rinse

in clean water and dry.

3

Clean the inside with a cloth soaked in warm soapy

dishwashing water. Then, use cold water to wipe off soapy

water.

4

Wipe the exterior with a soft cloth each time it is soiled.

5

Clean the Magnetic door seal with a toothbrush and warm

soapy dishwashing water.

6

Wipe the control panel with the dry cloth.

NOTE

To prevent damage to your refrigerator, do not use heavy duty

cleansers or solvents (lacquer, paint, polishing powder, benzine,

boiled water, etc.).

If the power supply is disconnected, please wait for at least

5 minutes before re-connecting power.

The glass shelves weigh approximately 3 kg each. Hold fi rmly

when removing from the cabinet or carrying.

Do not drop objects inside the refrigerator or strike the inner wall.

This may cause the inner surface to crack.

Defrosting

Defrosting is fully automatic due to a unique energy saving

system.

When the compartment light is blown

Contact the service agent approved by SHARP to request a

replacement compartment light. The compartment light is not to

be removed other than by qualifi ed service personnel.

When transporting

Before transporting, empty the ice tray by the following

procedure.

Empty the water tank and the ice storage box.

1

Set Ice tray cleaning mode “ON”.

2

(Refer to “Ice tray cleaning”.)

About 40sec. later, empty water or ice of ice storage box

3

when you hear the ending sound.

Wipe up water in the evaporating pan. Before wiping up the

water, wait more than 1 hour after pulling out the plug because

refrigeration cycle equipment is extremely hot.

(The evaporating pan is located on the rear of the product.)

The casters allow the refrigerator to

move back and forth.

Carry the refrigerator by holding the handles located on the

rear and bottom.

Switching off your refrigerator

If you switch your refrigerator off when you are going away

for an extended period, remove all food, clean the interior

thoroughly. Remove the power cord plug from the power socket

and leave all doors open.

CARE AND CLEANING

Casters

Evaporating pan

(B423)W_1.indb 18

(B423)W_1.indb 18

2013/04/18 18:24:50

2013/04/18 18:24:50

Advertising
This manual is related to the following products: