Sharp MX-2614N User Manual
Page 345
3-80
PRINTER SPECIFICATIONS
*1 When the PS3 expansion kit is installed and the machine is used as a PostScript printer.
*2 Barcode font kit is required.
*3 When the XPS expansion kit is installed.
*4 Required when there is insufficient memory to handle certain print data. Must be used when the XPS expansion kit
is installed.
*5 MX-2314N only
*6 On the MX-2314N, the productivity kit is required.
Type
Built-in
Continuous printing speed
MX-2314N: 23 pages/min
MX-2614N: 26 pages/min
MX-3114N: 31 pages/min
(When printing same document continuously on A4 (8-1/2"x11") plain paper in non-offset mode,
excluding processing time.)
Printing resolution
600x600 dpi, 9600 equivalent x 600dpi
Printer driver type
PCL6, PostScript 3 compatible*
1
, XPS*
3
, Sharp Advanced Printing Language-c*
5
Supported protocols
TCP/IP, IPX/SPX, NetBEUI, EtherTalk*
1
Supported client PC
operating systems
See "VERIFYING SYSTEM REQUIREMENTS" in the Software Setup Guide.
Fonts
PCL6
80 European fonts, 28 barcode fonts*
2
, 1 bitmap font
PostScript 3 compatible*
1
136 European fonts
Interface port
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Supports USB 2.0 (Hi speed)
Memory
Standard system memory: 1GB*
6
Expansion memory: 2GB*
4
*
6
Print area
Entire page excluding margin of 4.2mm (11/64") at each edge. The actual print area may vary
depending on the printer driver and the software application.