Sharp MX-2614N User Manual

Page 692

Advertising
background image

7-24

SYSTEM SETTINGS

Contents

*1 When a finisher is installed.
*2 This setting is used to adjust the line width of vector graphics (black & white printing only). Except for CAD and other

specialized uses, there is normally no need to change this setting. When "0" is selected, all lines are printed at a
width of 1 dot.

*3 Paper sizes that can be used with this function are A3, B4, A4, 11" x 17", 8-1/2" x 14", and 8-1/2" x 11". (This function

may not take effect with some print methods.)

*4 Only effective when printing PDF, JPEG, and TIFF files.

PCL Settings

This is used to set the symbol sets, fonts, and line feed code used in a PCL environment.

Settings

Item

Description

Selections

PCL Symbol Set Setting

Specify the symbol set used for
printing.

Select from 35 items.

PCL Font Setting

Use this to select the font used for
printing.

• Internal Font
• Extended Font

(List of internal fonts when extended fonts are not
installed.)

PCL Line Feed Code

This setting is used to select how
the printer responds when a line
feed command is received.

• 0.CR=CR; LF=LF; FF=FF
• 1.CR=CR+LF; LF=LF;FF=FF
• 2.CR=CR; LF=CR+LF; FF=CR+FF
• 3.CR=CR+LF; LF=CR+LF; FF=CR+FF

Wide A4

When this is enabled, 80
characters per line can be printed
on A4 size paper using a 10-pitch
font. (When this setting is
disabled, up to 78 characters can
be printed per line.)

(Enabled)

(Disabled)

Advertising
This manual is related to the following products: