Sharp UP-600 - Manual (Page 10)

9
5. Server sign-on report
A server sign-on report can be generated at the master. This report is used to determine which
terminal each server has signed on.
Report generation procedure
1.
Turn the mode switch to the PGM2 position.
2.
Select “INLINE READING” from the PGM2 mode
menu and press the [ENTER] key.
3.
Select “SIGN ON SERVER” from the INLINE
READING menu and press the [ENTER] key.
In the case of the UP-700:
Server name, server code, machine no. of
the terminal at which the server has signed on